Product specification:

L1200 * w300 * h980mm

optional:

face recognition all-in-one machine

card swiping system

Product Description:

the whole machine is made of 304 stainless steel (frosted steel) new movement, shaft drive improved motor, patch main board and power board, led direction indication on the upper cover and card swiping windows on the left and right sides Mechanical anti pinch function, 3 pairs of infrared, infrared anti pinch function and other red acrylic baffles, including voice function, moving arrow, anti trailing and other functions

product function introduction:

● the equipment organically integrates mechanical, electronic, microprocessor control and various identity recognition technologies, which is convenient to be compatible with IC card, ID card, bar code card The use of fingerprint and other card reading identification equipment,

● coordinate and realize the intelligent control and management of the channel by selecting various identification system equipment and adopting reliable security protection devices, alarm devices, direction instructions, etc

● divided into: Single Core: used for single channel and multi-channel; Dual movement: used for multi-channel

basic product parameters:

● it has the function of fault self-test and alarm prompt, which is convenient for users to maintain and use

● through the built-in small press panel on the main control board, the operation state of programmable equipment

● mechanical structure and induction double anti pinch function. When the telescopic arm is blocked in the process of resetting, it will automatically stop or the motor stops working within the default time. After the default delay, it will be reset again (until reset), and the force is very small (≤ 2kg)

● sound and light alarm function: including illegal intrusion and trailing alarm

● anti scour function, when the opening signal is not received, the telescopic arm will automatically lock

● telescopic boom synchronization function

● it has automatic reset function. After opening the gate, if there is no passage within the specified time, the system will automatically cancel the user's permission to pass this time. The standard is automatic reset 5 seconds after opening

● the channel will open automatically after power failure and close automatically after power on

● it can be connected with a variety of card reading equipment to receive relay switch signals

● one way or two-way control of personnel access

● remote control and management can be realized directly through the management computer

● expandable function: counting function; The chassis is lengthened and the telescopic arm material is selected

Product technical parameters:

● chassis material: domestic standard (304) stainless steel

● external dimension: 1200 * 300 * 980mm

● telescopic boom length: 260mm

● maximum channel width: ≤ 550mm

● weight: 65kg

● power supply voltage: AC220 ± 10% v, 50Hz

● drive motor: DC brush motor (24V)

● input interface: relay switch signal or 12V level signal or 12V pulse signal with pulse width > 100ms, drive current > 10mA

● normal service life: 3 million times

● communication interface: TCP / IP communication

● traffic speed: 30-40 people / min

● gate opening Closing time: 0.6 seconds

● time required to enter the traffic state after power on: 3 seconds

● automatic reset time after failure: 10 seconds

● working environment: indoor and outdoor (shade)

● temperature: - 15 ℃ - 60 ℃, relative humidity: ≤ 90%, no condensation