The popularity of intelligent parking lot management system is higher and higher, which brings great convenience to the management of parking lot. The parking lot management system we usually use may have some trouble. It is completely controlled by the vehicle, but there is no way of automatic braking. What's the problem? This phenomenon, which we usually call "excessive riding of the car", is usually caused by the following reasons: the problem of the main line may be the incorrect burial or damaged coil
the power supply is insufficient, the power of the vehicle detector is insufficient or the sensitivity is too low. Poor contact, the COM port of the ground sensor and the grounding of the channel brake controller are not in poor contact or disconnected
our intelligent parking system has image comparison function, but the monitoring screen cannot monitor the vehicle image. What's going on? Check whether the surveillance camera is installed correctly, such as whether the graphics card driver is installed normally, whether the camera has power supply, and whether the connection with the graphics card is normal. If the surveillance camera can be used normally, check the software parameter settings of the intelligent parking system to turn on the camera
why does the driver press the "card" button and the card swiping machine does not respond or act, but does not make a card? How to solve it? If the card machine does not respond, it may be that the contact is stuck or the plug is broken. Another reason is that the card machine is not on the card. This should be checked. If the card machine does not move, it may be that the card is stuck. Check whether the outlet slot is blocked or too small< br/>